Kenwood DPX-7100MDi

Kenwood DPX-7100MDi is an MD/CD receiver equipped with a backlight “variable color display” that changes to 10 colors in a blue skeleton body. The display color can be selected from 10 colors, and a variable color display that can change the display color in order is also possible. In addition, like the DPX-9100MJi, it has a built-in mobile phone hands-free function that can automatically receive calls, and by using an optional hands-free kit with a microphone *1 , a full-fledged fusion of car audio and mobile phone is realized. .

Equipped with a newly developed high-performance pickup and high-precision servo circuit, it can read music signals recorded not only on CD-R but also on CD-RW *2 . Equipped with 6-hole simulation preset DSP and 7-band 5-mode preset equalizer, you can easily enjoy realistic DSP sound. Built-in 47W x 4ch super high power amplifier.

*1: CA-HF100 (for normal mobile phones) and CA-HF200 (for cdmaOne), both 5,000 yen, excluding tax *2: MP3 data playback is not supported.

[MD department]

• Frequency response: 20Hz to 20kHz (±1dB)
• S/N ratio: 90dB (1kHz)
• Dynamic range: 90dB
• Stereo Separation: 85dB

[CD section]

• Frequency response: 10Hz to 20kHz (±1dB)
• S/N ratio: 93dB (1kHz)
• Dynamic range: 93dB
• Stereo Separation: 85dB

[FM section]

• Receiving frequency range: 76.0MHz to 90.0MHz (100kHz steps)

[AM section]

• Receiving frequency range: 522kHz to 1629kHz (9kHz steps) Sensitivity: 28dBμ

[EQ section]

• Equalizer center frequency: 60, 160, 400, 1k, 2k, 6k, 16kHz
• Variable range: ±12dB

[Audio part]

• Maximum output: 47W x 4
• Rated output: 29W x 4 (4Ω, 1kHz, 10%THD)
• Pre-out level: 1500mV (FM/10kΩ)

[Common part]

• Power supply voltage: 14.4V (11 to 16V)
• Maximum current consumption: 10A
• Embedded dimensions: 178 (W) x 100 (H) x 155 (D) mm
• Mass: 2.9kg

Content adapted from: Kenwood Press Release yodobashi.com

Kenwood DPX-7100MDi User Manual JP (poor quality scan)

Submit your own! Edit the page, use the photo submission form, or Contact us.